Decoding Wireless network passwords stored in Windows
Step 1) Download the Cain and Abel tool
Download Cain & Abel from the link provided above.
Open Cain and Abel
WiFi Password Hacker
Step 2) Select the Decoders tab and choose Wireless passwords
Ensure that the Decoders tab is selected then click on Wireless Passwords from the navigation menu on the left-hand side
Click on the button with a plus sign
How to Hack WiFi Password
Step 3) The passwords will be shown
Assuming you have connected to a secured wireless network before, you will get results similar to the ones shown below
Crack Wi-Fi Network
Step 4) Get the passwords along with encryption type and SSID
The decoder will show you the encryption type, SSID and the password that was used.
What is a wireless network?
A wireless network is a network that uses radio waves to link computers and other devices together. The implementation is done at the Layer 1 (physical layer) of the OSI model.
How to hack wireless networks
How to access a wireless network?
You will need a wireless network enabled device such as a laptop, tablet, smartphones, etc. You will also need to be within the transmission radius of a wireless network access point. Most devices (if the wireless network option is turned on) will provide you with a list of available networks. If the network is not password protected, then you just have to click on connect. If it is password protected, then you will need the password to gain access.
Wireless Network Authentication
Since the network is easily accessible to everyone with a wireless network enabled device, most networks are password protected. Let’s look at some of the most commonly used authentication techniques.
WEP
WEP is the acronym for Wired Equivalent Privacy. It was developed for IEEE 802.11 WLAN standards. Its goal was to provide the privacy equivalent to that provided by wired networks. WEP works by encrypting the data been transmitted over the network to keep it safe from eavesdropping.
WEP Authentication
Open System Authentication (OSA) – this methods grants access to station authentication requested based on the configured access policy.
Shared Key Authentication (SKA) – This method sends to an encrypted challenge to the station requesting access. The station encrypts the challenge with its key then responds. If the encrypted challenge matches the AP value, then access is granted.
WEP Weakness
WEP has significant design flaws and vulnerabilities.
The integrity of the packets is checked using Cyclic Redundancy Check (CRC32). CRC32 integrity check can be compromised by capturing at least two packets. The bits in the encrypted stream and the checksum can be modified by the attacker so that the packet is accepted by the authentication system. This leads to unauthorized access to the network.
WEP uses the RC4 encryption algorithm to create stream ciphers. The stream cipher input is made up of an initial value (IV) and a secret key. The length of the initial value (IV) is 24 bits long while the secret key can either be 40 bits or 104 bits long. The total length of both the initial value and secret can either be 64 bits or 128 bits long. The lower possible value of the secret key makes it easy to crack it.
Weak Initial values combinations do not encrypt sufficiently. This makes them vulnerable to attacks.
WEP is based on passwords; this makes it vulnerable to dictionary attacks.
Keys management is poorly implemented. Changing keys especially on large networks is challenging. WEP does not provide a centralized key management system.
The Initial values can be reused
Because of these security flaws, WEP has been deprecated in favor of WPA
WPA
WPA is the acronym for Wi-Fi Protected Access. It is a security protocol developed by the Wi-Fi Alliance in response to the weaknesses found in WEP. It is used to encrypt data on 802.11 WLANs. It uses higher Initial Values 48 bits instead of the 24 bits that WEP uses. It uses temporal keys to encrypt packets.
WPA Weaknesses
The collision avoidance implementation can be broken
It is vulnerable to denial of service attacks
Pre-shares keys use passphrases. Weak passphrases are vulnerable to dictionary attacks.
