#1. Open the X2 2020 and click on the “IST Generate” option (top left).
#2. Click on the “Read Card” button (middle bottom).
#3. From the details that appear on the screen “Copy Track 2 Data.”
#4. Click on the “EMV” option (located top left).
#5. Paste that “Track 2” data and replace “D” located in the middle of “Track 2” with “=”
#6. Insert “Card Holders Name” in its field it should be in “LAST NAME FIRST NAME” format (insert capital letters).
#7. In “Application Label Field” insert “Card type” in our case it’s “VISA DEBIT” (insert capital letters).
#8. In “Track 1 Discretion Data” you checkmark the box first then delete the “Default Value” that gets generated, then click on the “IST Generate” tab to copy “Track 1” then go back to the “EMV” tab and insert “Track 1” in its field there.
#9. In the “Credit” field select your card type select “VISA” as our card was VISA (make sure to check track 1 again as changing the value in this section will replace Track 1 with a default value, so if that happens just replace that default value with Track 1 again) and in “Writer” field is “MCR200” as our hardware is MCR200.
#10. In “AID” for “VISA” it’s “31010” for master it’s going to be “41010” so we typed “31010”
#11. In “Country Code” insert your country code, ours is “0840” for the US.
#12. In the “PIN” box insert your “Card/Dump Pin”
#13. In “Currency Code” insert your “Card/Dump Currency Code” for USD its “0840”
#14. In the “ARQC” section just “ignore that” for now.
#15. For “Pref Name” we can leave that “as it is” for now.
#16. For “Effective Date” click on the “Change Data” checkmark and then see the “Expiry Date” and Reverse it 4 years so for example if the expiry date of the card/dump is 28/02/2022 the “Effective Date” AKA Issue Date would be 28/02/2018 and you will insert it in “YYMMDD” format like “180228” inside “Effective Date”
#17. For “Expiration Date” check the “IST Generate” tab and then see the “Expiry Date” on that page for example if the expiry date of the card/dump is 28/02/2022 you will go back to the “EMV tab” and insert it in “YYMMDD” format like “220228”
#18. Now take out the “Original Donor Card” and insert the “Java White Card” to clone in your “MCR200” hardware.
#19. Now it’s time to burn the “White Java Card” by clicking on the “Credit” button located at the bottom right.
#20. You will see once you click “Credit” the “MCR200” will start writing and once done it will say “Completed Job.”
#21. Leave everything as it is!
——— CONGRATS HALF OF THE WORK IS DONE! ——— CLIC THE LINK ABOVE TO READ THE NEXT STEP...
#2. Click on the “Read Card” button (middle bottom).
#3. From the details that appear on the screen “Copy Track 2 Data.”
#4. Click on the “EMV” option (located top left).
#5. Paste that “Track 2” data and replace “D” located in the middle of “Track 2” with “=”
#6. Insert “Card Holders Name” in its field it should be in “LAST NAME FIRST NAME” format (insert capital letters).
#7. In “Application Label Field” insert “Card type” in our case it’s “VISA DEBIT” (insert capital letters).
#8. In “Track 1 Discretion Data” you checkmark the box first then delete the “Default Value” that gets generated, then click on the “IST Generate” tab to copy “Track 1” then go back to the “EMV” tab and insert “Track 1” in its field there.
#9. In the “Credit” field select your card type select “VISA” as our card was VISA (make sure to check track 1 again as changing the value in this section will replace Track 1 with a default value, so if that happens just replace that default value with Track 1 again) and in “Writer” field is “MCR200” as our hardware is MCR200.
#10. In “AID” for “VISA” it’s “31010” for master it’s going to be “41010” so we typed “31010”
#11. In “Country Code” insert your country code, ours is “0840” for the US.
#12. In the “PIN” box insert your “Card/Dump Pin”
#13. In “Currency Code” insert your “Card/Dump Currency Code” for USD its “0840”
#14. In the “ARQC” section just “ignore that” for now.
#15. For “Pref Name” we can leave that “as it is” for now.
#16. For “Effective Date” click on the “Change Data” checkmark and then see the “Expiry Date” and Reverse it 4 years so for example if the expiry date of the card/dump is 28/02/2022 the “Effective Date” AKA Issue Date would be 28/02/2018 and you will insert it in “YYMMDD” format like “180228” inside “Effective Date”
#17. For “Expiration Date” check the “IST Generate” tab and then see the “Expiry Date” on that page for example if the expiry date of the card/dump is 28/02/2022 you will go back to the “EMV tab” and insert it in “YYMMDD” format like “220228”
#18. Now take out the “Original Donor Card” and insert the “Java White Card” to clone in your “MCR200” hardware.
#19. Now it’s time to burn the “White Java Card” by clicking on the “Credit” button located at the bottom right.
#20. You will see once you click “Credit” the “MCR200” will start writing and once done it will say “Completed Job.”
#21. Leave everything as it is!
——— CONGRATS HALF OF THE WORK IS DONE! ——— CLIC THE LINK ABOVE TO READ THE NEXT STEP...
